Search results

The purpose of this paper is to examine the multiple paths of absorptive capacity’s (AC) effect on business performance (BP): direct effect and indirect effects through innovation and mass customization (MC).

The authors examined the role of innovation and MC capability on the relationship between AC and BP. Data from 278 Chinese firms in four manufacturing industries collected by questionnaire are used to empirically examine the proposed model by Structural equation modeling.

The results show that AC can directly enhance BP, and indirectly through innovation and MC capability. The study also finds that MC capability has a stronger mediating effect than innovation.

Prior studies have not yet built linkages between AC and BP with both innovation and MC’s effects. This study provides empirical evidence of the effects of AC on BP and three paths are discussed including AC’s direct effect and indirect effects through innovation and MC to firm’s BP. This study provides a new direction for executives to better understand the movement of knowledge along supply chain and in intra-organizational environment, and of the importance of innovation and MC capability since they are essential carriers for BP enhancement.

In innovation networks, firm innovation performance is affected by external tie strength and internal knowledge absorptive capacity. This study aims to empirically examine the path relationship between tie strength, absorptive capacity and firm innovation performance in Chinese manufacturing industries, thus enhance our understanding on the mechanism between innovation network and innovation performance.

The authors have conducted a survey among Chinese manufacturers in four industries (textile and garment, household appliance, IT and electronics and motor vehicle assemblers) that are located in North, East, Central and South China, respectively, with a valid response from 278 manufacturers. Structural equation model is used to analyze the results.

This study demonstrates that in Chinese Manufacturing industry, tie strength is positively related to innovation performance. The authors also find that absorptive capacity has a positive impact on innovation performance and it mediates the relationship between tie strength and innovation performance. Then, the authors analyze the effect of ownership, industry and sub-region, and the results show that in private firms and traditional manufacturers, and the firms located in North and Eastern China, tie strength has no direct effect on innovation outcomes, but it can influence innovation indirectly through absorptive capacity.

This study further supports that in Chinese guanxi culture, strong ties with other innovation partners can improve the firm’s absorptive capacity and thus improve innovation performance. The results also suggest that a firm’s absorptive capacity has a significant mediating effect on the relationship between tie strength and innovation performance.

As quality issues become more prominent in supply chain (SC) management, understanding the factors driving SC quality integration (SCI_Q) and quality performance has become increasingly important, shifting the focus of quality management to firms in SCs. This study aims to examine the role of SC quality leadership (SCQL) in facilitating SCI_Q and its direct and indirect relationship with quality performance.

Data on 400 Chinese manufacturing firms were collected using survey questionnaires. The hypothesised relationships between SCQL, SCI_Q and quality performance were tested using structural equation modeling in AMOS 22.0.

Empirical results show that SCQL has a positive and significant effect on quality performance and all three dimensions of SCI_Q: supplier quality integration, internal quality integration and customer quality integration. The results also show that SCI_Q mediates the relationship between SCQL and quality performance.

Executives should develop SCQL to improve SCI_Q in their SCs and ultimately improve quality performance. In particular, nurturing SQI can potentially lead to unique capabilities, relative to competitors. They should be aware of their important role in integrating and coordinating between functional units within the firm and between SC members.

This study enriches the SCM literature by identifying SCQL as a new and significant antecedent of SCI_Q in manufacturing firms. It contributes to the SC leadership literature by conceptualizing both the quality and social responsibility aspects of SC leadership, conceptualizing SCQL at the firm level and positioning SCI_Q as a mediator between SCQL and quality performance.

This paper aims to clarify the friction properties of 304 steel surface modification. The surface modification includes laser texturing processing and nitriding treatment on 304 steel surface, and then the friction properties’ test was conducted on different friction directions and different upper test samples by using microfriction and wear testing machine.

The diameter and spacing of 100-, 150-, 200-, 300-μm pit array on the surface of 304 steel were calculated using a M-DPSS-50 semiconductor laser device. Then, the textured surface was nitriding-treated using a nitriding salt bath device. The chemical composition, surface morphology and surface microhardness of the composite-modified surface were measured by X-ray diffraction and by using an optical microscope and a microhardness tester. The tribological characteristics of the composite-modified surface were tested by MRTR microcomputer-controlled multifunctional friction and wear testing machine.

The result showed that a rule pit texture surface was obtained by the texture processing. The microhardness of nitriding treatment surface reached 574.27HV0.1, which significantly higher than 222.58HV0.1 of 304 steel. The composite-modified surface has excellent anti-friction and wear resistance properties when the upper specimen was GCr15 steel and ZrO2, respectively. The composite-modified surface has excellent anti-friction and anti-wear properties after long time friction under different angles. However, the friction coefficient and wear morphology of the friction pairs are not affected by the friction angle.

Because of the chosen research approach, the research results may lack generalizability. Therefore, researchers are encouraged to test the proposed propositions further.

The paper conducted a systematic study of the tribological characteristics of 304 steel composite modification surface and provided a good basis for the extensive application of 304 steel.

The study provides a good basis for the extensive application of 304 steel.

This paper fulfils an identified need to study the extensive application of 304 steel.

This study aims to investigate the impact of supply chain concentration (SCC) on corporate research and development (R&D) investment and determine the moderating roles of industry concentration and financing constraints on the relationship between SCC and R&D investment.

The study collected data from Chinese listed companies, used the fixed effects model to test the research hypotheses and further used the two-stage Heckman test and propensity score matching (PSM) to address potential endogeneity issues.

The result reveals a negative impact of SCC on corporate R&D investment. In addition, industry concentration mitigates the negative impact of SCC on corporate R&D investment, but financing constraints strengthen the negative impact.

This study introduces the concept of SCC and empirically tests its effect on R&D investment, further explaining the lack of corporate innovation. This study inspires companies to strengthen SC management and weigh the level of SCC with environmental factors.

The purpose of this paper is to investigate the dependence of dark current on threading dislocations (TDs) in relaxed Ge layer for Ge/Si heterojunction photodetectors.

The analysis of the effects of TDs is based on SRH generation and recombination mechanism used in two‐dimensional drift‐diffusion numerical simulation.

It is found that the TDs in Ge layer acting as the recombination centers lead to large dark current densities of devices, and the recombination rate is affected by the impurity out‐diffusion from Si substrate. Besides, the TDs, being the acceptor‐like defects simultaneously, form band barrier at Si/Ge interface with lightly doped Si substrates, thus limiting the minority carrier transport and resulting in low dark current densities.

The simulation results are excellently consistent with the experimental data and indicate that the reduction of threading dislocation densities (TDDs), especially in Ge buffer layer, dramatically decreases dark currents densities of Ge/Si photodetectors. The investigation can be applied to imbue devices with desired characteristics.

Due to climate change and an increasing concentration of the world’s population in vulnerable areas, how to manage catastrophe risk efficiently and cover disaster losses fairly is still a universal dilemma.

This paper applies a law and economic approach.

China’s mechanism for managing catastrophic disaster risk is in many ways unique. It emphasizes government responsibilities and works well in many respects, especially in disaster emergency relief. Nonetheless, China’s mechanism which has the vestige of a centrally planned economy needs reform.

I propose a catastrophe insurance market-enhancing framework which marries the merits of both the market and government to manage catastrophe risks. There are three pillars of the framework: (i) sustaining a strong and capable government; (ii) government enhancement of the market, neither supplanting nor retarding it; (iii) legalizing the relationship between government and market to prevent government from undermining well-functioning market operations. A catastrophe insurance market-enhancing framework may provide insights for developing catastrophe insurance in China and other transitional nations.

First, this paper analyzes China’s mechanism for managing catastrophic disaster risks and China’s approach which emphasizes government responsibilities will shed light on solving how to manage catastrophe risk efficiently and cover disaster losses fairly. Second, this paper starts a broader discussion about government stimulation of developing catastrophe insurance and this framework can stimulate attention to solve the universal dilemma.

This paper aims to draw on a number of indicators of innovation to evaluate and compare two central regions – Hubei and Hunan – with three leading regions of China – Beijing, Shanghai and Guangdong.

The paper focuses on absorptive capacity at the level of domestic regions of China, using data on R&D expenditures, human resources in higher education and in high-tech industries. The paper uses social network analysis to investigate innovation networks based on patents from the SIPO and USPTO.

Results indicate that, in Hubei and Hunan, R&D expenditures do not translate into as many innovative outputs as in the coastal and Southern regions. Moreover, high-tech industries contribute towards a relatively low proportion of the regional outputs of Hubei and Hunan, where especially the electronics industry is very poorly represented. Findings also suggest that Hubei and Hunan have a relatively limited access to foreign technologies embedded in ties with international partners. By contrast, the more advanced three regions tend to develop collaborative activities across national boundaries to a higher extent than across regional boundaries.

The analysis of China's regional innovation system has implications for research on national innovation systems. Policy-makers can benefit from the comparative analysis of regions.

The study is primarily exploratory, and the findings contribute to the literature and ongoing discussion on data sources and methods for the analysis of regional innovation.

This paper aims to analyse how both Lin’s birthplace identity and his Christian identity contributed to his fruitful public career and to ascertain which identity became the most significant.

Archival research is the main method used in this paper. The most important archives drawn from are the Daniel Tse Collection in the Special Collection and Archives of the Hong Kong Baptist University Library. Oral history has also been used in this paper to uncover more material that has not yet been discussed in existing scholarly works.

This paper argues that although Lin’s birthplace identity and social networks helped him to start his business career in Nam Pak Hong and develop into a leader in the local Chaozhou communities, these factors were insufficient to his becoming a respectable member of the Chinese elite in post-war Hong Kong. He became well known not because of his leading position in local Chaozhou communities or any great achievement he had obtained in business but because of his contribution to the development of Christian education. These achievements earned him a reputation as a “Christian educator”. Thus Lin’s Christian identity became more important than his birthplace identity in contributing to his successful public career.

This paper has value in showing how Christian influences interacted with various cultural factors in early Hong Kong. It also offers insights into Lin’s life and motivations as well as the history of the institutions he contributed to/founded. It not only furthers our understanding of the Chinese Christian business elite in early Hong Kong but also provides us with insights when further studying this group of people in other British colonies in Asia.